Integrated Board
Super X9DRi-F
SuperServer 6027TR-HTRFC

Key Features
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-26002. Intel® C602 chipset; QPI up to 8.0GT/s3. Up to 512GB DDR3 1600MHz ECC
    Registered DIMM; 16x DIMM sockets4. Expansion slots: 
    3x PCI-E 3.0 x16 and 3x PCI-E 3.0 x85. Intel® i350 Dual port GbE LAN6. 8x SATA2 and 2x SATA3 ports7. Integrated IPMI 2.0 and KVM with
    Dedicated LAN8. 11x USB 2.0 ports 
    (4 rear, 6 via header + 1 Type A)




Product
  • SuperServer 6027TR-HTRFC
 
Motherboard
MBD-X9DRi-F -O
  • X9DRi-F
   
 
Physical Stats
Form Factor
  • E-ATX/ATX
Dimensions
  • 12" x 13", 13.68" x 13" E-ATX and 12" x 10" ATX
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 (up to 135W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s

** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
  • Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
AHCI SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
     SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA (Storage Controller)
  • SATA 2.0 3Gbps with RAID 0, 1, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • Matrox G200eW
 
Input / Output
AHCI SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
SCU SATA
  • 4x SATA 2.0 ports (3Gbps)
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 11x USB 2.0 ports total
    (4x rear + 6x via header + 1x Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 ports: 1 rear and 1 header
DOM
  • 1 DOM (Disk on Module) power connector
 



























Chassis
Form Factor
  • 2U Rackmount
Model
  • 825TQ-R740
 
Dimensions
Height
  • 3.5" (89mm)
Width
  • 17.2" (437mm)
Depth
  • 25.5" (648mm)
Gross Weight
  • 52 lbs (23.6kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Optional Front Bezel
 
Drive Bays
Hot-swap
  • 8x 3.5" SATA Hot-swap drive trays
  • SAS or enterprise SATA HDD only recommended
Peripheral Bay(s)
  • 1x 5.25" full-height peripheral bay
 
Peripheral Drives
DVD
  • Slim DVD-ROM drive (Optional)
 
Backplane
1x 2U SAS backplane w/ Enclosure Management
 
System Cooling
Fans
  • 4x 80mm 6300 RPM fans
 
Power Supply
740W (1+1) Redundant high-efficiency power supply with PMBus
>AC Voltage
  • 100 - 240V, 50-60Hz, 9 - 3.5 Amp
+5V
  • 30 Amp
+5V standby
  • 4 Amp
+12V
  • 61.7 Amp
-12V
  • 0.6 Amp
+3.3V
  • 24 Amp
Certification 80 PLUS   80 PLUS Certified
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • 3x 80x38mm 4-pin PWM Fans
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection switch
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 5°to 35°C (41°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)