Products Support News Apply About blank reseller
Intel System AMD System Compucon System Chassis
Why Supermicro NZ?     Supermicro FTP      APlus BIOS List
NZ Newsroom US Newsroom
Supermicro NZ     Compucon NZ
Barebone Pricelist System Quote Chassis Option Logout
 
Supermicro NZCompucon NZ
Contact Us

Log In
Supermicro Mission Critical Server Solutions
Print




Integrated Board
X10SLM-F
SuperServer S5018D-MTFC

Key Features

1. Single socket H3 (LGA 1150) supports
    Intel® Xeon® E3-1200 v3, 4th gen.
    Core i3, Pentium, Celeron processors
2. Intel® C224 Express PCH 3. 4x 3.5" Hot-swap SATA3 HDD bays 4. 1x PCI-E 3.0 x8 (in x16) Full-height slot
    optional
5. Up to 32GB DDR3 ECC 1600MHz
    UDIMMs in 4 sockets
6. Dual Gigabit Ethernet LAN ports
    (1x Intel® i217LM & 1x Intel® i210AT)
7. IPMI 2.0 on Dedicated LAN port 8. 350W Gold Level Power Supply


Product SKUs
S5018D-MTFC
  • Supermicro 5018D-MTFC Barebone
 
Motherboard
Super X10SLM-F
 
Processor/Cache
CPU
  • Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
  • Socket H3 (LGA 1150)
 
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) 1600MHz
  • Support ECC DDR3 UDIMM only
Memory Type
  • 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C224 PCH chipset
SATA
  • 2x SATA2 (3Gbps) w/ RAID 0, 1
  • 4x SATA3 (6Gbps) w/ RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Aspeed AST2400 BMC with 10/100/1000Mbps
Network Controllers
  • Intel® i217LM + Intel® i210AT Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
  • Aspeed AST2400 BMC
 
Input / Output
Serial ATA
  • 6 SATA ports
  • 4 SATA 6Gbps hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB rear ports
  • 1x USB Type-A
  • 4x USB ports via header
  • Total 9 USB 2.0 Compliant
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 serial port
  • 1x internal header
 
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-813MTQ-350CB
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 19.8" (503mm)
Gross Weight
  • 38 lbs (16.5kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x USB ports
  • 1x Serial COM Port
 
Expansion Slots
PCI-E
  • 1x PCI-E 3.0 x8 slot (optional)
 
Drive Bays
Hot-swap
  • 4x 3.5" Hot-swap SATA2 HDDs w/ RAID
 
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
 
System Cooling
Fans
  • 4x 4cm 12,500 RPM PWM fans
 
Power Supply
350W AC power supply w/ PFC
AC Voltage
  • 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V
  • 18 Amp
+5V standby
  • 3 Amp
+12V
  • 29 Amp
+3.3V
  • 15 Amp
Certification 80 PLUS Gold
  80 PLUS Gold Certified
  [ Test Report ]
 
System BIOS
BIOS Type
  • 8Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10° to 35°C (50° to 95°F)
  • Non-operating Temperature: -40° to 70°C (-40° to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed: