|
|
If you are interested in doing business with Supermicro NZ, apply here for a login account.
|
|
|
|
|
 |
|
 |
Integrated Board |
|
|
|
SuperServer 6027TR-HTRFC
Key Features
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-26002. Intel® C602 chipset; QPI up to 8.0GT/s3. Up to 512GB DDR3 1600MHz ECC
Registered DIMM; 16x DIMM sockets4. Expansion slots:
3x PCI-E 3.0 x16 and 3x PCI-E 3.0 x85. Intel® i350 Dual port GbE LAN6. 8x SATA2 and 2x SATA3 ports7. Integrated IPMI 2.0 and KVM with
Dedicated LAN8. 11x USB 2.0 ports
(4 rear, 6 via header + 1 Type A)
|

|
 |
MBD-X9DRi-F -O |
|
|
|
|
 |
Form Factor |
|
Dimensions |
- 12" x 13", 13.68" x 13" E-ATX and 12" x 10" ATX
|
|
 |
CPU |
- Intel® Xeon® processor E5-2600 (up to 135W TDP **)
- Dual Socket R (LGA 2011)
|
Cache |
|
System Bus |
|
|
** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
|
 |
Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
 |
Chipset |
|
AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
SCU SATA (Storage Controller) |
- SATA 2.0 3Gbps with RAID 0, 1, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Video |
|
|
 |
AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
SCU SATA |
- 4x SATA 2.0 ports (3Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 11x USB 2.0 ports total
(4x rear + 6x via header + 1x Type A)
|
Video |
|
Serial Port / Header |
- 2x Fast UART 16550 ports: 1 rear and 1 header
|
DOM |
- 1 DOM (Disk on Module) power connector
|
|
 |
Form Factor |
|
Model |
|
|
 |
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
 |
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
Optional Front Bezel |
|
|
 |
Hot-swap |
- 8x 3.5" SATA Hot-swap drive trays
- SAS or enterprise SATA HDD only recommended
|
Peripheral Bay(s) |
- 1x 5.25" full-height peripheral bay
|
|
 |
DVD |
- Slim DVD-ROM drive (Optional)
|
|
 |
1x 2U SAS backplane w/ Enclosure Management
|
|
 |
Fans |
|
|
 |
740W (1+1) Redundant high-efficiency power supply with PMBus |
>AC Voltage |
- 100 - 240V, 50-60Hz, 9 - 3.5 Amp
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
Certification |
80 PLUS Certified |
|
 |
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- 3x 80x38mm 4-pin PWM Fans
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
Other Features |
- Chassis intrusion detection switch
|
|
RoHS
|
|
Environmental Spec.
|
- Operating Temperature: 5°to 35°C (41°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|