|
|
|
If you are interested in doing business with Supermicro NZ, apply here for a login account. |
|
|
|
|
|
|
|
|
 |
| 4 Integrated Boards |
|
|
|
Key Features
Eight (8) Nodes in 2U. Two (2) Nodes per Single Hot-swap tray. Optimized for High Density and Low Power consumption UP Atom Server.1. Intel® Atom™ D525 (Pineview-D)
Dual Core, 1.8GHz (13W) processor2. Intel® ICH9R Express Chipset3. 4GB non-ECC DDR3 800MHz SO-DIMM
(per node); support total up to 32GB4. 3x 2.5" Hot-swap SATA HDD per node;
total of 24x HDDs (RAID 0, 1, 5)5. 2x Intel 82574L Gigabit Ethernet LAN
2x RJ45 LAN ports per node6. Integrated IPMI 2.0 with shared LAN7. (1+1) Redundant 720W Gold Level
power supply with PMbus8. "Cable-Free" Twin Architecture
|
 |
| SYS-2015TA-HTRF |
- SuperServer 2015TA-HTRF (Black)
|
| |
|
| CPU |
- Intel® Atom™ D525 processor
|
| System Bus |
|
| |
|
| Memory Capacity |
- Two 204-pin SO-DIMM sockets
- Up to 4GB unbuffered non-ECC DDR3 800MHz SO-DIMM (Single Channel)
|
| Memory Type |
- DDR3 800MHz unbuf., non-ECC SO-DIMM
|
| DIMM Sizes |
- 2 GB, 1 GB, 512 MB, 256 MB
|
| Memory Voltage |
|
| |
|
| Chipset |
- Intel ICH9R Express
- Intel 82574L
|
| SATA |
- 6x SATA (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- High Performance Intel® 82576BE Dual Port Gigabit LAN
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| Super I/O |
|
| |
|
| Serial ATA |
- 3x SATA ports (3Gbps) through hot-plug slot, with RAID 0, 1, 5
- 1x SATA port onboard
|
| USB |
- 6 USB 2.0 ports (2 rear + 4 via 2 headers)
|
| LAN |
|
| IPMI |
- Integrated IPMI 2.0 with shared LAN
|
| DOM |
- 1x DOM (Disk on Module) power connector
|
| Others |
- 2x COM port headers ready
- TPM 20-pin header ready
|
| |
|
| BIOS Type |
- AMI BIOS, 8Mb SPI Flash ROM
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
3.47" (88mm) |
| Width |
17.25" (438mm) |
| Depth |
26.75" (679mm) |
| Gross Weight |
85 lbs (38.6kg) |
| Available Colors |
Black |
| |
|
| Buttons |
|
| LEDs |
- Power status LED
- Network activity LED
- System overheat/fan fail/power fail LED
|
| |
|
| Hot-swap |
- 24x 2.5" Hot-swap SATA drive bays total
- Enterprise SATA HDD only recommended
|
| |
|
| Fans |
- 4x 80mm heavy duty fans with PWM
fan speed controls
|
| |
|
| 720W (1+1) Redundant high-efficiency power supply with PMBus |
| AC Input |
- 100-240 V, 50-60 Hz, 4-9 Amp
|
| DC Output |
- 3 Amp @ +5V standby
- 59 Amp @ +12V
|
| With Power Distributor |
| +5V |
|
| +3.3V |
|
| -12V |
|
| Certification |
80 PLUS Gold Certified
[ Test Report ] |
| |
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
|
| Other Features |
|
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
