Products Support News
 
Supermicro NZCompucon NZ
Contact Us
Log In
Supermicro Mission Critical Server Solutions
Supermicro NZ Customers
User Login
If you are interested in doing business with Supermicro NZ, apply here for a login account.



Print




Integrated Board
Super X8DTi-F

Key Features
1. Intel® Xeon® processor 5600/5500
    series, with QPI up to 6.4 GT/s 2. Up to 192GB DDR3 1333/ 1066/ 800MHz
    ECC Registered DIMM / 48GB
    Unbuffered DIMM 3. 1 (x16) PCI-E 2.0,
    2 (x8) PCI-E 2.0,
    1 (x4) PCI-E (in x8 slot),
    2x PCI 33MHz slots 4. Intel® 82576 Dual-Port Gigabit
    Ethernet 5. Integrated Graphics 6. 6 x 3.5" Hot-Swap SATA Drive Bays 7. 700W Power Supply 8. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
Available Colors: Black    


 
Product SKUs
SYS-6026T-TRF
  • SuperServer 6026T-TRF (Black)
 
Motherboard
Super X8DTi-F
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W
    • Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 8 MB DDR2
Super I/O
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Winbond 83827HF chip
 
Expansion Slots (Low Profile)
PCI-Express
  • 4 (x8) PCI-E 2.0 slots
  • 1 (x4) PCI-E 2.0 slot
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 1 Floppy controller; 1.44 MB
Floppy
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB rear ports
  • 2x USB on-board
  • 4x USB internal headers
  • Total 8 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 2U Rackmount
Model
 
Dimensions
Height
  • 3.5" (89mm)
Width
  • 16.8" (426mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 50 lbs (22.7kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Optional Front Bezel
 
Drive Bays
Hot-swap
  • 6x 3.5" SATA Hot-swap drive trays
Peripheral Bay(s)
  • 1x 5.25" full-height peripheral bay
 
Peripheral Drives
DVD
  • Slim DVD Drive (Optional)
 
Motherboard
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
 
System Cooling
Fans
  • 4x 80mm 6300 RPM fans
 
Power Supply
700W AC-DC high-efficiency power supply w/ PFC
Redundant Cooling
AC Voltage
  • 100 - 240V, 60-50Hz, 8.3 - 3.5 Amp
+5V
  • 30 Amp
+5V standby
  • 4 Amp
+12V
  • 54 Amp
-12V
  • 0.5 Amp
+3.3V
  • 25 Amp
Certification 80 PLUS   80 PLUS Certified
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Standard Parts List
  Part Number Qty Description
Chassis CSE-825TQ-R700LPV
CSE-825TQ-R700LPB		 1
1		 2U Chassis (Silver): OEM *
2U Chassis (Black)
Air Shroud MCP-310-28001-0N 1 SC825/826/216/213 Intel DP X8X7 PC air shroud [ Manual ]
Backplane BPN-SAS-825TQ 1 SAS / SATA Backplane [ Manual ]; SAS-2 compatible
Cable(s) CBL-0157L
CBL-0180L-01		 1
1		 8-pin to 8-pin Ribbon Cable for SGPIO (Supports Up to 4 Drives)
SATA Cable Set
Fan(s) FAN-0094L4 3 2U, 80x38mm 4-pin PWM fan with HUS
Fixed Hard Drive Carrier MCP-220-82502-0V(B)
MCP-220-82503-0B		 2
1		 FDD dummy tray support 1x 3.5" HDD
Black slim FDD kit
Hot-swap Hard Drive Carrier MCP-220-00001-03(01) 8 Silver SATA Hot-swap Hard Drive Carriers (01 = Black)
Mounting Rails MCP-290-00053-0N 1 26.5" to 36.4" rail set, quick/quick, default for 2, 3U 17.2" W chassis
Rail Adaptor MCP-290-00060-0N 1 Square hole to round hole rail adaptor set
Peripheral Drives DVM-PNSC-824B
CSE-PT92L
MCP-220-00007-01		 1
1
1		 Black slim IDE DVD (8x DVD, 24x CDR), Panasonic
Slim IDE DVD kit (include backplane, cable)
Black USB/COM port tray
Power PWS-702A-1R
PDB-PT825-8824		 2
1		 700W 2U power supply
Power Distributor
Optional Parts List
  Part Number Qty Description
Cable(s) CBL-0084
CBL-0157L
CBL-0044L
CBL-0082L
CBL-0296L		 -
-
-
-
-		 Split Front Panel Cable
8-pin to 8-pin Ribbon Cable for SGPIO (For Additonal Drives)
SATA Cable, S-S, 61cm
Y-split SATA power adapter
Fan extension cord, 9"
Heatsink / Retention - - Please refer to our Thermal Components Matrix
Mounting Rails MCP-290-00058-0N - 19" to 26.6" rail set, Quick Release, Tool-less
Peripheral Drives FPD-TEAC-S(B/V)
MCP-290-00007-(01/03)		 -
-		 Slim TEAC Floppy Drive (B = Black / V = Silver)
DVD-ROM Drive Dummy Cover (01 = Black / 03 = Silver)
Peripheral Drives DVM-TEAC-824B
DVM-TEAC-DVD-SBT1
DVM-PNSC-DVD-SBT1
MCP-220-81502-0N		 -
-
-
-		 Black slim IDE DVD (8x DVD, 24x CDR), TEAC
Black slim SATA DVD (8x DVD, 24x CDR), TEAC
Black slim SATA DVD (8x DVD, 24x CDR), Panasonic
Slim SATA DVD kit (include backplane, cable)
Trays MCP-220-00023-01
MCP-290-00036-0B		 -
-		 Black USB dummy tray support 1x 2.5" slim HDD
Black DVD dummy tray support 1x 2.5" slim HDD
Front Bezel
( Compatibility Table )		 MCP-210-82503-0B -


  * For OEMs Only - Minimum quantity required. Please contact your Supermicro Sales representative for additional details.
 
© 2024 Supermicro New Zealand